SO 56000

Pre-assembly stud

for stainless steel, brass M, aluminium unions

Pre-assembly stud
additional picture 1
additional picture 2

Pre-assembly stud

for stainless steel, brass M, aluminium unions

SO Code: -
Art. no.: -

Technical details

d = Tube outside diameter
Pre-assembly stud
The pre-assembly stud is used for the pre-fitting of the nut connection.

Instructions:
Clamp the pre-assembly stud in a vise.
Screw on the nut connection.
Push the tube into the nut connection.
Tighten the union nut approx. 1 1/2 turns with an open ended spanner (mechanical stop).
Final assembly in the equipment approx. 1/4 turn.

Keep the flat metal surface clean.

Occasional lubrification of the thread and the flat metal surface facilitate pre-assembly.

Please refer to the installation instructions.

For automated pre-assembly see the devices SERTOtool/SERTOspeed in chapter 21.

Material: Steel 1.2312

Documents

  • Installation instructions brass / stainless steel / aluminium / steel Download
Type (Cust.) Art. no. d SW L g/pc CAD Legend
Type SO 56000-6/-6,35 Art. no. 1036873 d 6.35 SW 11 L 36.0 g/pc 37 CAD -
pcs
Type SO 56000-8 Art. no. 1036870 d 8.0 SW 11 L 37.0 g/pc 41 CAD -
pcs
Type SO 56000-10/-9,52 Art. no. 1036863 d 10.0 SW 14 L 37.0 g/pc 65 CAD -
pcs
Type SO 56000-12 Art. no. 1036852 d 12.0 SW 14 L 37.0 g/pc 70 CAD -
pcs
Type SO 56000-15/-12,7/-13,5/-14 Art. no. 1036889 d 15.0 SW 17 L 40.0 g/pc 101 CAD -
pcs
Type SO 56000-18/-16/-17,2 Art. no. 1037633 d 18.0 SW 19 L 40.0 g/pc 142 CAD -
pcs
Type SO 56000-22/-21,3 Art. no. 1037631 d 22.0 SW 22 L 40.0 g/pc 189 CAD -
pcs
Type SO 56000-28 Art. no. 1037421 d 28.0 SW 27 L 46.0 g/pc 347 CAD -
pcs
Type SO 56000-35 Art. no. 1018582 d 35.0 SW 36 L 60.0 g/pc 642 CAD -
pcs
Pre-assembly stud
The pre-assembly stud is used for the pre-fitting of the nut connection.

Instructions:
Clamp the pre-assembly stud in a vise.
Screw on the nut connection.
Push the tube into the nut connection.
Tighten the union nut approx. 1 1/2 turns with an open ended spanner (mechanical stop).
Final assembly in the equipment approx. 1/4 turn.

Keep the flat metal surface clean.

Occasional lubrification of the thread and the flat metal surface facilitate pre-assembly.

Please refer to the installation instructions.

For automated pre-assembly see the devices SERTOtool/SERTOspeed in chapter 21.

Material: Steel 1.2312

Documents

  • Installation instructions brass / stainless steel / aluminium / steel Download